Prepare yourself with the twin scraper pack at a reduced price.
The Twin scraper pack will scrape soot off register plates and scrape tar from chimneys.
Firstly, The 150 x 100 mm flat scraper will fit neatly into your tool bag and unlike other scrapers on the market is flat. It will scrape soot off register plates tar from chimneys. It is heavy enough that it should stay seated on the surface and collect waste with no fuss. For smaller gaps turn on its side and use as a 100 mm scraper.
In addition, The 270 x 100 mm flat angled scraper is for use on heavily neglected dirty register plates. Designed by sweeps to fit onto Rodtech Click rods. Shaped so that the back edge is 100 mm wide with two 100mm edges at 30-degrees. This scraper has angles so you can scrape large quantities of soot from register plates. It is heavy enough that it should stay seated on the surface and collect waste with no fuss.
For smaller gaps turn on its side and use this as a 100 mm (4”) scraper.
- 150 x 100mm Flat Scraper
- 270 x 100mm Angled Scraper.