Black Fire Cement by Vitcas 310ml Tube (WH11-D2)

Black Fire Cement 1250°C is a finely ground putty-like material which is resistant to high temperatures. Rates to 1250oC. It is used for the repair of fire bricks, stoves, fireplaces, etc and sealing flue pipes

SKU P10-C2 Category

£3.99 Excluding VAT

In stock


Black Fire Cement

Black Fire Cement is a finely ground putty-like substance that is resistant to high temperatures. Rated to 1250°C. Other uses for Black Fire Cement include repairing fire bricks and sealing flue pipes.


  • Sealing and jointing internal flue pipes
  • Repairing small cracks and damage on firebricks
  • Repairing firebacks
  • Seals and small repairs on fireplaces, gas cookers, stoves and ranges, central heating systems and boilers.


To achieve maximum adhesion, remove all dirt, dust and rust, and make sure the area is thoroughly clean.


You should use this black fire cement straight from the tub. Apply with a trowel, knife or hand and work well into the area. Fine joints can be made. Heat dry the repaired surfaces, raising the heat to full temperature over 3-4 hours. Apply further cement to any fine cracks which may appear.

Store any unused material in a cool dry place away from children and pets. In case of contact with skin and eyes rinse immediately with plenty of water and seek medical advice. After contact with skin, wash with water. Wear suitable gloves and eye face protection. Keep out of reach of children.

Additional information

Weight0.65 kg
Dimensions30 × 5 × 5 cm

310ml Cartridge, 500g Tub, 1KG Tub, 2KG Tub


There are no reviews yet.

Be the first to review “Black Fire Cement by Vitcas 310ml Tube (WH11-D2)”

Your email address will not be published. Required fields are marked *